Supply hoses
Expertise & Know How
System development for our customers
Made in Germany
Kottmann – Supply hoses
For more than 15 years now, Kottmann´s flexible supply hoses have proven a success in the sanitary and heating industry. Recent developments and technologies have led to new cer- tifications and extended requirements – for pressure hoses.
Tod, the Kottmann technology highly popular with our customers meets the latest technical requirements and all important global drinking water certifications. The hoses are also PAH- free, REACH-compliant and available with lead-free and low lead brass materials.
These days, this type of flexible hose is produced primarily using
the Kottmann technology due to its huge technical benefits. Customers can also choose from all the customary inliners, such as TPE, silicone, EPDM or Pex.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/elementor/thumbs/1-psdjl5ci79dlefn2djobt85zsv4qlqtbm156w42ouo.png)
Stainless steel braided hoses
With their excellent flexibility and easy and safe assembly, Kottmann hoses have been successfully competing against other types of inner tubes The material provides a high degree of tensile strength.
Variations and design overview
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/2.png)
Stainless steel braided
Different lengths available.
I.D. of inner tube: 6, 8, 10, 13 mm
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/3.jpg)
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/4.jpg)
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/5.jpg)
Polyester braided
Different lengths available.
I.D. of inner tube: 6, 8, 10, 13 mm
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/6.jpg)
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/7.jpg)
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/8.jpg)
TPE reinforced hoses
Different lengths available.
I.D. of inner tube: 6, 8 mm
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/9.jpg)
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/10.png)
Installation instruction
Safety and persistence through correct installation.
1. The hose should not be installed un- der stress so there is no pulling effect.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/11.jpg)
2. The hose should not be installed un- der stress and not twisted.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/12.jpg)
3. The hose should not be installed behind a wall.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/13.jpg)
4. The minimum bending radius is 20 mm.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/14.jpg)
5. In case of using a compression fitting the hose can be installed watertightly once.
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/15.jpg)
hex nut – washer – pressurehose
Important: Install products without the use of power tools. Using tools may cause overtensioning and damage.
Selection of standard fittings
Different materials are used depending on the requirement, for example brass CW614N, stainless steel, plastic, lead reduced (CW510L) or lead free brass materials (CW724R).
3/8“ male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/16.jpg)
M8x1 male thread 18 mm
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/17.jpg)
M10x1 male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/18.jpg)
8 mm pipe
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/19.jpg)
1/2“ male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/20.jpg)
M10x1 male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/21.jpg)
10 mm pipe
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/22.jpg)
M10x1 male thread long
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/23.jpg)
1/2“ male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/24.jpg)
3/4“ male thread
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/25.jpg)
Elbow for 3/4“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/26.jpg)
Elbow for 3/4“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/27.jpg)
Elbow for 3/8“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/28.jpg)
Elbow for 1/2“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/29.jpg)
Elbow for 1/2“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/30.jpg)
1/2“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/31.jpg)
9/16“ hexagon nut 3/8“ compression
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/32.jpg)
9/16“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/33.png)
3/8“ hexagon nut
![](https://usercontent.one/wp/www.kottmann.eu/wp-content/uploads/2022/07/34-1.jpg)